Language
NEWS
Check category

The 20th China International Rubber Technology Exhibition

(Summary description)China International Rubber Technology Exhibition, which started in 1998, has experienced many years of exhibition history, and has now become a platform for companies in the industry to conduct brand promotion and trade promotion,

The 20th China International Rubber Technology Exhibition

(Summary description)China International Rubber Technology Exhibition, which started in 1998, has experienced many years of exhibition history, and has now become a platform for companies in the industry to conduct brand promotion and trade promotion,

Information

China International Rubber Technology Exhibition, which started in 1998, has experienced many years of exhibition history, and has now become a platform for companies in the industry to conduct brand promotion and trade promotion, as well as a channel for information communication and new technology exchange. With the rapid growth of the international rubber industry, the exhibition has now gathered more than 700 exhibitors with an exhibition area of 50,000 square meters. Exhibitors come from nearly 30 countries and regions in the world, including rubber machinery and equipment, rubber chemicals, rubber raw materials, tires and non- Tire rubber products and rubber recycling are integrated. It is an annual event for operators of all aspects of the rubber industry.

From September 16 to 18, 2020, the 20th China International Rubber Technology Exhibition will join the 19th China International Chemical Industry Exhibition, the 23rd China International Adhesives and Sealants Exhibition, and the 2020 China Petrochemical Industry Safety and Environmental Protection Exhibition Held at the same time and in the same place to jointly create the "Sinopec Industry Week" to realize the promotion of the entire industry chain and a global perspective. By then, more than 50,000 professional visitors from home and abroad will come to the scene.

 

Keyword:

Previous: None
Next: None
Previous: None
Next: None

Products Recommended

Silicon carbide seal
Silicon carbide materials have high hardness, high wear resistance and chemical resistance. It has good thermal conductivity and stable performance at high temperature. It is a high-temperature structural material.
α-Al₂O₃ High-purity Ultrafine Powder
Alumina is white powder, main component of bauxite, and has different crystals. Stable crystals are α-Al2O3 and γ-Al2O3. α-Al2O3 is hexagonal crystal, insoluble in water
Accelerator TETD
Rubber accelerator TETD is odorless, insoluble water, dilute acid and alkali, and slightly soluble in acetone, benzene, methyl benzene, carbon disulfide and chloroform. Its density is 1.17~1.30/cm3. It leads to stimulation to the skin and mucosa.
Antiager DNP
DNP is one of important and low-toxicity antioxidants used in rubber or plastics processing. It is heat-resistant and ageing-resistant, and also resists harmful metal, such as, Copper and Manganese.
Accelerator DOTG-70
DOTG-70 results in quite slow set-up of curing and slow curing rate. It also causes serious vulcanization reversion when used alone. DOTG-70 will obtain synergistic
Cross-link Agent TCY-70
TCY-70 is used in CO, ECO, ACM, CIIR and BIIR products and NBR/PVC blends.
Accelerator ETU(NA-22)-80
ETU(NA-22) powder adheres to devices easily, disperses difficultly in mixing process. However, ETU(NA-22)-80has good dosing and mixing property, and won’t cake at ordinary temperature and humidity. It has good fluidity Molecular Formula C3H6N2S Molecular Weight 102.17 Cas No.  96-45-7 Chemical Name N,N'-ethylene thiourea  Einecs No. 202-506-9   Typical Properties   Accelerator N,N'-ethylene thiourea(ETU(NA-22)) Percent Active 80% Binder EPDM/EVA Appearance white to cream granule Density ~1.27g/cm3 (20℃)   Product Description ETU(NA-22)-80 imparts fast curing rate and safe scorch to CR. It is used as activator or assistant accelerator for other diene rubber with low or non sulfur. ETU(NA-22)-80 won’t bloom and can improve heat-resistance and mechanical properties of vulcanizate.   Processing Characteristics Generally, ETU(NA-22) powder adheres to devices easily, disperses difficultly in mixing process. However, ETU(NA-22)-80has good dosing and mixing property, and won’t cake at ordinary temperature and humidity. It has good fluidity, no irritating dust and no material loss. It keeps optimal activity of ETU(NA-22) and easily disperses in kinds of rubber compounds. Recommend that ETU(NA-22)-80 is added at last stage of mixing.   Dosage In general, 0.1 ~ 2.0 phr.   Applications ETU(NA-22)-80 is a universal accelerator for CR, CSM and CPE products.   Packaging Coextruded paper bags lined with plastic film, net weight 25Kg/bag.   Storage Store in a cool, dry, well-ventilated area away from sunlightfor up to 1 year.   Safety and toxicity Refer to related MSDS.
Foaming Agent OBSH-75
OBSH-75 starts to foam at 150℃and releases N2. Appropriate foaming activator can decrease the start of foaming temperature. Reasonable match of foaming rate and curing rate can increase foaming performance.
Antiager NDBC(NBC)
NDBC(NBC) is soluble in chloroform, benzene and carbon disulfide, slightly soluble in acetone, but insoluble in water. Its density is 1.26g/cm3, melting point above 86℃, flash point 263℃. It has good storage ability. It is non-toxic, results in skin irritation, and harm body by absorbing vapour or dust of NBC.
Accelerator ZDEC(ZDC、EZ)
ZDEC(ZDC、EZ) is used as a fast-speed curing accelerator for natural and synthetic rubber, especially BR, EPDM and latex. It is good active agent for thiazoles or sulfonamide. I
Accelerator TMTM(TS)-80
预分散促进剂TMTM(TS)-80用于天然橡胶和合成橡胶时的硫化速度非常快且焦烧安全性好;与碱性促进剂如醛胺类、胍类并用能增加其活性
Accelerator SDBC(TP)
橡胶促进剂SDBC(TP)天然胶、丁苯胶、氯丁胶及乳胶用超促进剂。硫化速度较二硫代氨基甲酸铵盐慢,焦烧时间长。因能与水混溶,适用于胶乳制品。
Reinforcing CH-STA
CH-STA can improve processing property, and generally added with other auxiliaries. HMT is added with vulcanizator together in the end of processing. It is widely used in NR etc. general rubber to increase hardness,
Zirconia ceramic sieve
Zirconia ceramics take ZrO2 as the main component. According to the added stabilizers, there are mainly yttrium stabilized zirconia, magnesium stabilized zirconia and cerium stabilized zirconia.
Aluminium sec-Butoxide
Aluminium sec-Butoxideused as active catalyst and carrier, inorganic membrane, reducing agent of aldehyde-ketone, oxidant of aldehyde-ketone,
Stearic acid
Stearic acid plays an important role in the synthesis and processing of rubber. Stearic acid is a vulcanization active agent widely used in natural rubber, synthetic rubber and latex, and can also be used as a plasticizer and softener.
Vulcanizator CH-WE
CH-WE octyl phenilic resin is thermal-reactive, and has active methylol group. It is applicable for IIR, EPDM, NBR, CR and NR, and soluble in aromatic solvent.
Al₂O₃ precision alumina ceramic substrate
Alumina ceramic substrate has good insulation, heat insulation and wear resistance. Because of its relatively low price and balanced comprehensive performance, it is one of the most widely used ceramic materials.
99.99γ-Al₂O₃ High-purity Ultrafine Powder
99.99γ-Al2O3 is odorless, tasteless and white powder. It is unstable crystal, and turns into θ-Al2O3 when the temperature is 1000℃ and stable α-Al2O3 when 1180℃. It is transparent or semitransparent, and its primary diameter is 6~10nm. The specific surface area is large (BET, 100~400m2/g) and surface chemistry is highly active.
Eco-friendly Accelerator TBzTD
TBzTD is a fast primary or secondary accelerator for NR, SBR or NBR, and a retarder when used with ETU in modifying NR. Compared with TMTD, TBzTD has safe processing and long scorch time.
AIP Aluminum iso-Propoxide
AIP is white small lump or powder, semi- transparent, and soluble in alcohol, isopropyl alcohol, benzene, toluene, chloroform and carbon tetrachloride. Its density is 1.035g/cm3. Tends to absorb moisture and reacts with water into aluminium hydroxide and isopropanol.
Tackifying CH-ED for EPDM
CH-ED is thermoplastic phenolic resin with special components, can blends with kinds of synthetic rubber as a tackifier. It is a dedicated tackifer for EPDM.
Al₂O₃ Precision alumina ceramic grading wheel
Al₂O₃Alumina ceramics have good insulation, thermal insulation and wear resistance. Because of their relatively low price and balanced performance, it is one of the most
Cross-linking Agent TAIC-98%
TAICis widely used as cross-linking agent or co-curing agent for thermal plastics, ion-exchange resin, rubber and cable, and as intermediate for photocurable coating and fire retardant. Generally, the dosage is 2.5~3.3.
Accelerator TDEC-75
Pre-dispersed accelerator TDEC-75 combined with thiazoles, thurams and dithiocarbamates can fast cure EPDM and IIR. A little TDEC-70 can cut down curing time.
Accelerator DPG-80
DPG-80 is used for all kinds of industrial products, especially rubber ones containing white fillers.
Antiager 4010NA(IPPD)
Antiager 4010NA(IPPD)Mainlyused for natural and synthetic rubber. It has good dispersion and doesn’t affect rubber curing.
Accelerator ZDMC(PZ)-80
ZDMC(PZ) powder has high melting point and large particle diameter, then it is so difficult to soften and disperse at processing temperature that vulcanization activity and mechanical properties of vulcanizate lower.
Alpha ultrafine alumina
Alumina is white powder, main component of bauxite, and has different crystals. Stable crystals are α-Al2O3 and γ-Al2O3. α-Al2O3 is hexagonal crystal,
电话

Hotline:

021-65726586

地址

Address:

Rm. 504, No.1398, PingLiang Rd.,Yangpu District, Shanghai, China 

About us

The company insists on independent innovation, and has obtained a number of scientific research achievements and invention patents in the fields of rubber chemicals and ultrafine materials.

Please leave your valuable comments

Username used for comment:
客户留言
Description:
验证码