PRODUCTS CENTER
Papua New Guinea Pre-dispersed accelerator NOBS(MBS)-80
Product Description
pre-dispersed acceleratorNOBS(MBS)-80
Product Features
|
active ingredient |
N-Oxydiethylidene-2-benzothiazolylsulfenamide (NOBS(MBS)) |
|
active content |
80% |
|
Carrier type |
EPDM/ethylene-vinyl acetate copolymer (EPDM/EVA) |
|
Appearance (visual inspection) |
White to beige granules |
|
Density |
~1.26g/cm3 (20 ℃) |
Product characteristicsThe pre-dispersed accelerator NOBS(MBS)-80 makes the scorch time of the compound quite long, the processing safety is very high and the vulcanization is very complete. It can be used alone as the main accelerator in low-sulfur vulcanization, or it can be used in combination with dithiocarbamate or thiuram accelerator, and the resulting vulcanizate has good heat aging resistance and good compression deformation; pre-dispersed accelerator NOBS(MBS)-80 and dithiocarbamate accelerator and thiuram accelerator will significantly reduce the scorch time of the compound. The combination of thiuram TMTM-80 accelerator and pre-dispersed accelerator NOBS(MBS)-80 has a particularly obvious promotion effect of shortening vulcanization time, and has good anti-scorch effect and high crosslinking degree. In low sulfur compound, in the compound containing sulfur alcohol accelerator and thiuram accelerator, the pre-dispersed accelerator NOBS(MBS)-80 can delay scorch.
Processing characteristicsUnder normal circumstances, powdered NOBS(MBS) is easy to fly and adhere to equipment, and it is not easy to disperse evenly during mixing. However, the pre-dispersion accelerator NOBS(MBS)-80 is easy to mix, will not agglomerate under normal storage conditions, has good fluidity, does not fly dust, and will not cause feeding loss. Eating materials in various rubber materials is easy and evenly dispersed, ensuring the activity of effective component NOBS; It is recommended to add at the end of mixing.
DosageNR:
Main accelerator: 0.8-1.2 parts and 2.5-4 parts of sulfur;
Auxiliary accelerator: 0.05-0.4 parts, 1-1.5 parts of thiazole accelerator and 1.5-3 parts of sulfur.
SBR: 0.1-0.4 parts combined with 1-1.5 parts of thiazole accelerator and 1.5-2.5 parts of sulfur.
NBR: 0.05-0.4 parts and 1.5-2.4 parts of sulfur and 0.8-1.5 parts of sulfenamide accelerator.
ApplicationTire tread, carcass, hose, tape, conveyor belt, cable and rubber shoes and other rubber products.
PackagingComposite paper bag, lined with plastic film bag, net weight 25kg.
StorageSealed and stored in a cool, dry, well-ventilated place, avoid direct sunlight, and can be stored for 1 year.
Safety and toxicityPlease refer to the relevant product safety data (MSDS).