Papua New Guinea Rubber accelerator TDEC(TEL)

Light yellow or yellow powder, molecular weight is 721, density (20 ℃) is 1.48g/cm3, bulk density is 0.32~0.36g/cm3, soluble in chloroform, benzene and carbon disulfide, slightly soluble in ethanol and gasoline, insoluble in water.

Product Description

rubber acceleratorTDEC(TEL)

 

 

Chemical name:Tellurium diethyldithiocarbamate

Structural formula:

Molecular formula:C20H40N4S8You

Molecular weight:721

CAS No.20941-65-5

EINECS No.244-121-9

Technical indicators:

Project

Indicators

Appearance (visual inspection)

Light yellow or yellow powder

Initial melting point, ℃ ≥

100.0

Heating decrement,%≤

0.50

Sieve residue (150 μm),%≤

0.10

Sieve residue (63μm),%≤

0.50

Tellurium content,%

16.5~19.0

 

 

Performance:Light yellow or yellow powder, molecular weight 721, density (20 ℃) 1.48 g/cm3Loosen density is 0.32~0.36 g/cm3Soluble in chloroform, benzene and carbon disulfide, slightly soluble in ethanol and gasoline, insoluble in water.

Use:This product is a natural rubber and synthetic rubber overspeed vulcanization accelerator. Especially suitable for butyl rubber and ethylene propylene rubber, can be used with thiazole, sulfonamide accelerators, vulcanization speed, can increase the tensile strength, modulus and tensile strength. Good aging resistance, no spray cream, no dyeing, no pollution, mainly used in the manufacture of air bags (inner tube, water tire), extrusion hose, wire and cable insulation, tape and molded products and heat-resistant industrial products.

Packing:Composite paper bag, lined with plastic film bag, net weight 25kg.

Storage:Sealed and stored in a cool, dry, well-ventilated place, away from direct sunlight.

Safety and Toxicity:Please refer to the relevant product safety data (MSDS).