Papua New Guinea Pre-dispersed scorch retarder CTP(PVI)-80

Pre-dispersed scorch retarder CTP-80 can delay the initial vulcanization of NR and synthetic rubber without significantly prolonging the total vulcanization time. Combined with sulfenamide or thiazole accelerator, the processing safety can be improved without affecting the performance of vulcanized rubber. The product can significantly improve the storage stability and high temperature processing safety performance of unvulcanized rubber, and fully improve the generation capacity of equipment. Contact pollution will not occur when using this product.

Product Description

pre-dispersed anti-scorch agentCTP(PVI)-80

 

Product Features

active ingredient

N-Cyclohexylthiophthalimide (CTP(PVI))

active content

80%

Carrier type

EPDM/ethylene-vinyl acetate copolymer (EPDM/EVA)

Appearance (visual inspection)

White to beige granules

Density

~1.23g/cm(20 ℃)

 

Product characteristicsPre-dispersed scorch retarder CTP-80 can delay the initial vulcanization of NR and synthetic rubber without significantly prolonging the total vulcanization time. Combined with sulfenamide or thiazole accelerator, the processing safety can be improved without affecting the performance of vulcanized rubber. The product can significantly improve the storage stability and high temperature processing safety performance of unvulcanized rubber, and fully improve the generation capacity of equipment. Contact pollution will not occur when using this product.

Processing characteristicsThe pre-dispersed scorch retarder CTP-80 will not agglomerate under normal storage conditions, is easy to weigh and mix, has good fluidity and no dust flying. Eating materials quickly and evenly in various rubber compounds can effectively ensure active ingredients and reduce defects of finished rubber products. Improve the dynamic performance of dynamic rubber products; As this product has been pre-dispersed, it is recommended to add it together with other accelerators at the end of mixing.

Dosage0.2 to 2.0 parts.

ApplicationNR and synthetic rubber compounds (tires, conveyor belts, outsoles, molded and extruded products, etc.) with sulfenamide or thiazole as the main accelerator.

PackagingComposite paper bag, lined with plastic film bag, net weight 25kg.

StorageSealed and stored in a cool, dry, well-ventilated place, avoid direct sunlight, and can be stored for 1 year.

Safety and toxicityPlease refer to the relevant product safety data (MSDS).