PRODUCTS CENTER
Papua New Guinea Rubber Reinforced Resin CH-STD
Category:
Product Description
rubber reinforcing resinCH-STD
Chemical name: Reinforced phenolic resin
Technical indicators:
|
Project |
Indicators |
|
Appearance (visual inspection) |
light yellow powder |
|
Sieve residue (150 μm),%≤ |
0.10 |
|
Acetone insoluble,%≤ |
1.5 |
|
Curing agent (HMT),% |
7.5±1.0 |
|
Grayscale,%≤ |
1.0 |
Performance:The resin is a non-reactive thermoplastic phenolic resin, which contains a curing agent HMT, powder, simple process, easy to disperse.
Use:Natural rubber, styrene-butadiene rubber, nitrile rubber and other synthetic rubber general reinforcing resin. Due to the inclusion of curing agents, CH-STD resins are generally added with vulcanizing agents at the end of the process. It is a powder, easy to disperse, can improve the process performance of the compound. It can significantly improve the hardness, strength and dynamic modulus of vulcanizates, and reduce the heat generation to a large extent, so that the physical and mechanical properties and dynamic properties of vulcanizates are greatly improved. The products are widely used in tire manufacturing, conveyor belts, V-belts, rubber rollers, coatings and other fields. Reference dosage 6~15 parts.
Packing:Composite paper bag, lined with plastic film bag, net weight 25kg.
Storage:Sealed and stored in a cool, dry, well-ventilated place, away from direct sunlight.
Safety and Toxicity:Please refer to the relevant product safety information.